The engine and trans are ready for install now. I pulled the front bumper off so as not to damage it when the engine goes in.

The engine was taken off the stand and put on the floor, then I went over and hoisted up the trans and put it on the table. Then back to get the motor on the hoist and brought it over next to the table. I bolted up the flywheel and torqued it to specs, then the clutch and pressure plate. This is all LS7 stuff so it should take the 450+hp and more I think Lucy Ann will produce.

Next was to pick it up and align it with the trans on the table. It took a little work doing it by myself but with the Lord's help it came together. I think I'm ready for an install on Sat. Whooppee!!!!!